COMPLETE TERRY DYEING & FINISHING PLANT

A70 7867

Production of high quality terry towel.
This is a complete and well equipped dyeing and finishing plant.
The machinery is for sale as one complete lot or will sell individual machines.
Now available for immediate delivery ,subject to remaining unsold.
The machinery is all from well known and respected manufacturers and is in
very good condition,having been professionally maintained.

 

A14 7604
Babcock Stenter Type 5000-5800.Year 1990 ,8 chambers,300cm max. width.
Horizontal return pin chain (originally pin/clip)
Entry with Heinz Hergeth Pol Rotor Type PH D GF 300
Mahlo weft straightener Type RF MD 76 aS
Stenter entry with operator platform,high control gantry .
Entry zone 3mts with E+ L uncurlers & photocell edge guiders.
8 Thermostatically controlled bays. All fans are 2/speed ,maximum working temperature of 220⁰C

Exit zone 3mts with cooling unit,web slitting unit.
Additional equipment,4 Pyrometers,PLEVA Moisture Monitor/speed controller.
front and rear monitoring cameras and screens. The maximum operating speed is 150m/min.

2 Franz Muller Shearing (Cropping) machinesType: PPS32 .Max working width 2000mm

Kusters Pad Mangle
Type: 222.53 - 3000
Equipped with a Zollig batchwinder working width of 3000mm

ATYC Hydro extractor
Type: CRF-1500,Year:1992
Equipped with unloader, 180Kg maximum capacity

Anglada Turbang System Relax Dryer
2 Compartments,Steam heated,1800mm working width, plaiter exit
HIGH TEMP SOFTFLOW DYEING MACHINES.
A24 7874/1
1. ATYC HT Jet. Year 2003
Overflow HT 2 Capacity 2 x 250 kg chambers
Max Temperature 135°C

 

 

 

A24 7875
2. ATYC HT Jet. Year 2004
Machine Type Overflow HT 2
Capacity 2 x 250 kg chambers
Max Temperature 135°C

A24 7874/2
3. ATYC HT Jet. Year 2003
Machine Type Overflow HT 2
Capacity 2 x 250 kg chambers
Max Temperature 135°C

A24 7876/1
4. ATYC HT Jet. Year 2004
Machine Type Overflow HT FP1 RS
Capacity 1 x 250 kg chambers
Max Temperature 135°C

A24 7876/2
5. ATYC HT Jet. Year 2004
Machine Type Overflow HT FP1 RS
Capacity 1 x 250 kg chambers
Max Temperature 135°C

Each Jet has 200 mm Jet diameter, low pressure with high flow circulation pump, filter system, pump assisted rapid drain capability .
1 addition tank, 1 bath preparation tank ,allows the next bath to be prepared while the current dyeing process is running reducing processing time,.
Low liquor ratio processing and Arel APC 504 controller.

ATMOSPHERIC TEMPERATURE SOFTFLOW DYEING MACHINES.
A23 7750
2 ATYC Atmospheric Jets,Type: BT-3FL 450,Year 1992
3 chambers atmospheric jet dyeing machine for heavy weight terry towelling fabric.
Each chamber can hold up to 133Kg ,total capacity of 400Kg.
Equipped with,unloading winch,heat exchanger & filter,main motor + pump.
1 addition tank .Electrical panel with Arel 304+ controller.
A23 7752
Fong Atmospheric Jet,Type: GN9-100-2T,Year:1998
Fong 2 chambers atmospheric jet dyeing machine for heavy weight terry towelling fabric.
Each chamber can hold up to 180Kg ,total capacity of 360Kg.
Equipped with,unloading winch,heat exchanger & filter,main motor + pump.
1 addition tank .Electrical panel with Arel 304+ controller
A23 7751
2 Fong Atmospheric Jets,Type: GN9-100-4TYear:1998
4 chambers suitable for heavy weight terry towelling fabric.
Each chamber can hold up to 180Kg ,total capacity 720Kg.
Equipped with,unloading winch,heat exchanger & filter,main motor + pump.
1 addition tank .Electrical panel with Arel 304+ controller

 

A23 7749
ATYC Atmospheric Jet,Type: BT.DUPLEX 4F.X,Year:1988
4 chambers atmospheric jet dyeing machine suitable for heavy weight terry towelling fabric.
Each chamber can hold up to 90Kg ,total capacity of 360Kg.
Equipped with,unloading winch,heat exchanger & filter,main motor + pump.
1 addition tank .Electrical panel with Arel 304+ controller

Arel On Time Volumetric Chemical Dispenser (OTD), 24 chemicals

Arel On Time Volumetric Chemical Dispenser (OTD) automatic dispensing system for liquid chemicals. The system measures the required quantity of liquid chemicals specified in the dyeing recipe and automatically delivers the measured chemical to the specified dyeing machine at the specified time.

The system combines a high capacity, variable speed lobe pump, a flow regulating device and a high precision flow meter with an Arel PC based control system for fully automatic and reliable operation.
A common distribution line with 3-way valves directs the chemicals to each dyeing machine. The lines are flushed with air prior to each dispensing cycle resulting in the need for minimal rinse water.
A unique algorithm controls the variable speed dosing pump and flow regulating valve enabling fast dispensing with high accuracy and turbulent rinsing ensures thorough cleaning of the system for each subsequent dispense.
TEXPA Cross Cut and Hem installation for terry .Year: 2000
The Texpa cross cut and hem installation for terry fabric is a high output yet flexible automatic chain
stitch cross hemming machine. It produces a minimum 12 mm up to a maximum 40 mm end hem and will
process towels from a minimum width of 300 mm to a maximum width of 1800 mm and a minimum length of
300 mm to a maximum length of 2400 mm. It is also equipped with an automatic roll feed loop label insertion mechanism.

SCHMALEDURATE 510
2 x Long hemming machines for terry fabric, table linen, dishtowels, napkins and much more. Aligning, edge trimming, hem formation and sewing.

SCHMALEDURATE 660 automatic cross hemming machine
2 x Automatic cross hemming machine for terry fabric, table linen, dishtowels, napkins and much. Alignment of the fabric webs, dimensioning, fitting with labels, hemming and sewing with breathtaking speed.

© 2018 Proudly created with Net-workedcouk Ltd